Search results
917003BR LORIOT Y 'DW41990 CODE ZXP'
'OO' Gauge
Released: 04/07/23
Era 4/5/6The GWR allocated the code ‘Loriot’ to flat wagons designed to move earth moving and plant machinery. The first appeared in 1892 and a family look soon evolved, with the wagon’s deck angled upwards at each end to clear the axles.
One new ‘Loriot’ was built in 1937. It was built to Diagram G39 and coded ‘Loriot Y’. But it didn’t look like the rest of the ‘Loriot’ family.
Originally, the GWR considered it to be an addition to its ‘Loriot W’ fleet. However, it was built from assembled ‘I’ beam girders rather than rolled beams, a feature first used on the ‘Crocodile’ bogie well wagons of 1908. Consequently, it was re-classified ‘Loriot Y’. A second ‘Loriot Y’ was built in 1939.
Both were painted with instructions that, when empty, they must be returned to Swindon. They would have run over large areas of the GWR’s network, moving excavators and other plant, particularly during the Second World War.
However, records for these two vehicles are few and far between. No. 41989 found fame when it starred in The Titfield Thunderbolt, where it was pressed into service to carry Dan’s house. It is believed to have been scrapped not long after the filming in 1953.
Sister ‘Loriot Y’ No. 41990 fared better. It remained in revenue-earning service until at least 1990 at Radyr Engineers Yard. Eventually, as DW41990 (coded ‘ZXP’ on TOPS), it moved to Bescot from where it was condemned in 1994. Saved at the 11th hour, it moved to the Severn Valley Railway where it remains to this day.
Our Price:
£35.95
£35.95
918009BR WR DEPARTMENTAL GREY TOAD BRAKE VAN DW17247
'HO' GaugeReleased: 29/06/23Era 6/7It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918008BR GREY TOAD BRAKE VAN YEOVIL PEN MILL W114764
'OO' GaugeReleased: 29/06/23Era 4/5It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918007BR GREY TOAD BRAKE VAN WORCESTER R.U. 'W114751'
'OO' GaugeReleased: 29/06/23Era 4/5It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918006BR WR GREY TOAD BRAKE VAN LEAMINGTON 'W68868'
'OO' GaugeReleased: 29/06/23Era 4It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918005GWR TOAD BRAKE VAN '68764'
'OO' GaugeReleased: 29/06/23Era 3It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918004GWR TOAD BRAKE VAN '17295'
'OO' GaugeReleased: 29/06/23Era 3It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918002GWR TOAD BRAKE VAN NEWTON ABBOT '68777'
'OO' GaugeReleased: 29/06/23Era 3It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
918001GWR TOAD BRAKE VAN HEREFORD BARTON '114756'
'OO' GaugeReleased: 29/06/23Era 3It was required by law that all goods trains had to have a brake van at the rear and the Great Western Railway settled upon a design that was as recognisable as its locomotives. The first ‘van with the single ended veranda and large, enclosed body for the use of the guard appeared circa 1871 and variants based on this configuration continued to be built into the 1950s.
The GWR allocated telegraphic codes to its goods vehicles and brake vans were dubbed ‘Toad’. Consequently, this name is how both railwaymen and enthusiasts referred to these vehicles.
Internally, the vans feature a desk, seating, storage lockers for equipment and a stove for keeping warm. Internal lighting was not provided. Sand boxes and sanders were fitted to both ends of the vans to aid with braking whilst the handbrake was fitted externally on the veranda along with the levers for operating the sanders. Full length footboards and handrails allowed the guard stand on the side of the vehicle during shunting operations.
The GWR allocated diagram numbers in the ‘AA’ series to 23 versions of post-1888 built ‘Toads’. Our model depicts the ‘AA20’, which was introduced in 1934.
The requirement for brake vans ended in 1968 but that didn’t mean the end of the ‘Toads’. Many lasted into Departmental and even industrial use and a large number of ‘Toads’, including several ‘AA20s’, have been preserved.
The model includes a full interior alongside a removable roof.
Our Price:
£35.95
£35.95
31-591AClass 70 with Air Intake Modifications 70811 Colas Rail Freight
'OO' GaugeReleased: 05/07/23
DCC Ready (21 Pin)Era 9On 26th November 2007, Freightliner UK and General Electric announced Project Genesis, later re-named PowerHaul, to design and develop a new Co-Co freight locomotive for the British rail network – the Class 70. Construction of the first modules for the PowerHaul locomotives took place in various locations across the world, for instance the bogie frames were manufactured in Austria and delivered to the GE plant in Pennsylvania for final assembly. The locomotive’s design is similar to that of the BR Class 58, with a narrow body bookended by two cabs which are accessed from walkways on the narrow part of the body – similar to many American diesel locomotive designs.
When introduced, the Class 70 dethroned the Class 59 as having the highest tractive effort of any Co-Co diesel operating in the UK. Designed to be powerful yet more fuel-efficient than older types, the Class 70 has a top speed of 75mph (120 km/h), which the 129 tonne machine achieves from its 2,750 kW (3,690 bhp) engine.
The first Class 70s arrived in the UK in November 2009 as part of Freightliner’s initial order for twenty locomotives. An option for a further ten locomotives was not taken up by Freightliner, but instead Colas Rail Freight took over this order and their first Class 70 entered service in 2014. Colas subsequently ordered seven more locos, with all of the Colas fleet being numbered in the 708xx series.
Our Price:
£212.45
£212.45
